Description
Product Details
The mounting height of the ESH-A Remote Sensor depends on the gas being monitored. A gas that is heavier than air should be detected 6 inches from the floor and a gas that is lighter should be detected on or near the ceiling. A gas that has the same density as air should be detected in the “breathing zone”, where most human breathing takes place, which is 1 to 2 m (4 to 6 ft) from the floor.
The ESH-A Remote Sensor comes in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secure door and is designed to protect the sensor and provide easy mounting components.
An optional splash guard may be installed to further protect the remote sensor in water spray or washdown applications.
The ESH-A Remote Sensor is not a standalone device, it must be used with the SCC, DCC, LPT-A, LPT-P, LPT-M or LPT-B (remote sensor’s target gas will differ based on device).
Features
- Allows remote location monitoring of combustible gases or TVOCs
- Current or voltage output signal
- Communicates with many of CETCI’s controllers and transmitters
- Easy to to install and maintain
- Standard water / dust tight, corrosion resistant enclosure (drip proof)
- IP54 rated with optional splash guard installed
Applications
- Equipment / Machinery Rooms
- Manufacturing Plants
- Food Processing Plants
- Battery Charging Rooms
Product Details
Enter additional product details here, if too long for Short Description section. Delete row if not required.
Accessories
CET Splash Guard
CET Cal Clip Calibration Adapter
CET Calibration Kit
